360-degree view: ELP 38/12 MEM N - Spare NBR diaphragm for ELP/ELPH , ,NBR Eco
€4.48
Quantity
pcs
Immediately available from the warehouse; order by 16:30 and we will send it today.
Item description
Materials: Body: brass, internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)
Temperature range: -10°C up to max. +80°C (types G 1/8" and G 1/4": -10°C up to max. +130°C), ambience: max. +50 °C
Media: Compressed air, neutral gases, water, neutral low-viscosity media, other media on request
Installation position: With upright magnets
Control voltages: Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance: ± 10 %
Protection class: IP 65
Optional: FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP
Information: These valves are always supplied with a solenoid coil and a connector plug.
Warning: For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.